How it works

Products

About us

About us

Contact us


How Water Gard Works
 
The Patented, UL Listed, Water GardTM Condensation Control System is the only totally electronic product to detect unsafe condensation levels inside the primary and/or safety/auxillary drain pans.
 
All Water GardTM Condensation Control Systems wire directly into the 24V side of the A/C system, interrupting the thermostat. Upon detecting an unsafe level of condensation, Water GardTM locks out the system, illuminatates a warning light and/or an audible alarm, alerting the customer to call for service.
 
Water GardTM can monitor primary and secondary drain pans with the adjustable Clip On Sensors, the secondary drain with the Screw In Sensor, or secondary pans with the magnetic, weighted Drop In Sensor set to detect water at 1/16". Water GardTM also allows you to monitor the water trap with the Primary Line Station. (for sensor descriptions see the Products page)
 
The Water GardTM condensation control system comes in several different configurations offering options on the type of monitoring desired. Installed in 15-20 minutes, the Water GardTM has 40" leads and the accessories have 40" leads, providing a total of 80 inches of lead wire. Each of the wires are color coded. Each unit comes with full color instructions and is backed by a limited, 3 year warranty.
 
 
PRODUCT SPECIFICATIONS
Sensor Type:   Conductive Probe (nickel plated brass)
Power Source:   24 VAC, 40 to 75 VA class 2 transformer
Max Output:   24 VAC, 75 VA
Input Power:   3.2A, 24 VAC, 60Hz
Wiring:   PCB Pre-wired with 40", 22 GA, multi-strand leads, color coded to PCB
Time Delay:   Variance 5-110 sec. from water contact to lock out.
Light Plate:   Size - 1 3/8" x 2 1/4", plastic, color - off white
Lamp:   24 VAC - LED, Red
Audible Alarm:   24 VAC Intermittent tone, 95db
Mounting:   Adhesive foam tape or screws
Warranty:   Three year replacement warranty
Testing:   Each PCB is tested using power source: 24 VAC, 75 VA, class 2 transformer
Water Gard, Inc. © 2004